Hi,
I recently bought an 2008 X3 that had three warning lights on: 4X4, airbag and brake (amber). I did the transfer case actuator gear replacement, and chnaged the fluid in the transfer case with BMW Xcase oil DTF 1 (850 ml). I erased the lights with a Creader 123 Pro but came back. The X3 feels like is running with a locked differential and acceleration is not smooth. I read that I need to reset the oil back to 100%, but this Creader does not allows me to do so.
I also cleaned all four wheel speed sensors and reluctor ring.
These are the codes I am getting:
587E
EGS Gearbox oil wear
DTC Status Current
54C6 Oil Wear
Status Current
6E3E
Steering Angle Sensor Adjustment required
DTC Status Current
What budget scan tool would allow me to calibrate the SAS, and the oil back to 100%? I have done my search but I was not able to find anything specific to these codes as to budget scan tool that I could buy.
https://www.autoguysland.com/best-car-diagnostic-tool/
Thanks in advance
Bookmarks