Hey everyone, I am attempting to get my car setup for street/auto-x.
TCKline DA's
Vorshlag camber plates
Strut tower reinforcements
450#/550#
Sway Barbarian on full soft
Ride height: F: 12.75", R: 11.5"
245's all around
Now, front shock travel appears to be in the 2.5"-3" zone before it hits the bump stop. Seems a little short to me. Is normal?
I have seen another poster with the same setup say he was running F: 12.5", R: 11.25". Doesn't seem right to me looking at the limited front travel
CARS
02.92 325is / 06.72 2002 / 02.91 XJ / 08.04 R53 JCW
Moved from the E36 M3 sub.
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd
88M3 AW 43k miles Project FS
WTB: 3.5" Eurosport/Conforti CAI
Don't have my notes in front of me, but those numbers seem well in the ballpark.
Are the bump stops cut/shortened (like I believe Koni and TCK recommend)?
Not sure if they are shortened to be honest, as I bought them a couple years ago second hand. I would venture to say no, judging by the lack of allowable travel. How can I determine for sure?
Last edited by xxxxxxx; 06-09-2019 at 09:45 AM.
CARS
02.92 325is / 06.72 2002 / 02.91 XJ / 08.04 R53 JCW
The stock ones for E36 look like this:
https://c1552172.ssl.cf0.rackcdn.com/16315_x800.webp
Cut, they look shorter.
I will snap a photo next chance I get.
CARS
02.92 325is / 06.72 2002 / 02.91 XJ / 08.04 R53 JCW
Bookmarks