Results 1 to 5 of 5

Thread: 79 Baur Part Out, maybe?

  1. #1
    Join Date
    Sep 2007
    Location
    Houston, Tx
    Posts
    1,978
    My Cars
    '78 320i

    79 Baur Part Out, maybe?

    Photo album, Google acct needed I think. (Album will grow)
    https://photos.app.*******/X3VMpyXLyYXuAMNA9

    I'm not 100% on this so sorry for a tease but I'm considering parting out the 79 320/6 Baur. More of a feeler to see if the demand is enough for a part out. It's an early model, grey market baby six Baur. It does have euro bumpers but they were reinforced with steel.

    The killer for me is the rust.
    The rust is down the windshield, in both rear wheel wells and up the strut towers. There's also rust that creeps from the wheel well to the back seat area. Significant rust down both front floor pans and down the frame rails. I believe these are the structural rust areas.

    There is rust on the front quarter panel and down the trunk and in other parts of the engine bay. A few brake lines are toast. Engine hasn't ran in 20 years.

    I was hoping to turn her in to the rat rod driver but the more rust I find the less inclined I'm to do so. I would have to carve out a good straight e21 to fix her and so far nothing affordable has fallen on my lap.

    At this rate I have zero qualms just keeping her in the garage and keeping her on a rust maintenance lifestyle. Also thinking of getting the engine turning at least for fun and to see if it's working condition.


    So I'd consider letting go of the entire car to someone who wants to do the repair or parting out the requested bits, like the euro pieces.. I need to keep a few parts since it's an early that matches my early. Otherwise I hope things like the Baur top can go to a good home.

    Sent from my LG-H830 using Tapatalk
    Last edited by jaredmac11; 06-06-2019 at 02:14 PM.

  2. #2
    Join Date
    Jul 2010
    Location
    San Jose, California
    Posts
    1,725
    My Cars
    E21 320i, E30 325i
    Pics would be good
    '81 E21 320i / '90 E30 325i / '̶9̶2̶ ̶E̶3̶4̶ ̶5̶2̶5̶i̶t (sold) / '15 Toyota XW30 / '̶̶8̶0̶ ̶E̶2̶1̶ ̶3̶2̶0̶i̶A̶ (sold)

  3. #3
    Join Date
    Sep 2007
    Location
    Houston, Tx
    Posts
    1,978
    My Cars
    '78 320i
    Trying
    Maybe the pics are too many or too large. Having a hard time posting here so I'll do an album and keep adding to it.

    Sent from my LG-H830 using Tapatalk

  4. #4
    Join Date
    Mar 2013
    Location
    Santa Rosa, CA
    Posts
    1,631
    My Cars
    1981 320i silver
    Can you graft that Baur roof onto a much better e21 shell?

  5. #5
    Join Date
    Sep 2007
    Location
    Houston, Tx
    Posts
    1,978
    My Cars
    '78 320i
    My understanding is Baur did quite a few reinforcements and it's not quite a chopped top.

    Sent from my LG-H830 using Tapatalk

Similar Threads

  1. Bought a 79 baur 320/6
    By sisith in forum 1975 - 1983 (E21)
    Replies: 14
    Last Post: 10-09-2011, 04:45 PM
  2. 87 baur "parts car" 500 bucks, and...
    By sefb222 in forum 1983 - 1991 (E30)
    Replies: 15
    Last Post: 01-01-2008, 06:44 PM
  3. Where to find Baur parts, specifically for the targa top!
    By GraphicRage in forum 1983 - 1991 (E30)
    Replies: 2
    Last Post: 07-31-2007, 06:20 PM
  4. any ideas...parts trade maybe? read
    By bmwtuner325is in forum 1991 - 1999 (E36)
    Replies: 26
    Last Post: 11-06-2006, 01:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •