Results 1 to 5 of 5

Thread: 15x6.5 et38 will it fit?

  1. #1
    Join Date
    Jul 2006
    Location
    Long Island ny
    Posts
    138
    My Cars
    00 Mk4 Gti

    15x6.5 et38 will it fit?

    looking at a set of rims for an 86 325. Just wanted to know if anyone is running a similar setup and what if any spacers are needed.

    15x6.5 et38.
    https://www.ebay.com/itm/15-Wheels-T...IAAOSwnN5bgNtV
    96' Mk3 Gti -Sold
    97' E36 M3 - Sold
    00' Mk4 Gti -current
    E30-S52 swap -some day

  2. #2
    richardodn's Avatar
    richardodn is offline Old Guy BMW CCA Member
    Moderator
    Join Date
    Nov 2008
    Location
    Lakewood, CO
    Posts
    9,942
    My Cars
    20 440ix cab, 12 X3 35ix
    A stock size is 15x7 et24. 1/2" inch narrower would reduce the necessary inboard clearance by 1/4" or about 6-7mm. This hypothetical wheel would then be 15x6.5 et31 so you're not far off. Your et38 might fit without spacers but more likely is you'll need 5 or 10mm.
    Last edited by richardodn; 05-25-2019 at 10:36 AM.
    "Howdy, Folks!"

    1986 Delphin 528e - Roof rack equipped lumber hauler.
    1989 Zinnoberrot 325iX Sedan - I miss this car. (Deceased)
    1998 Avus Blau 328iC - Someone else's project now
    2008 Platinum-Beige X3 3.0si - Current project
    2012 Alpine White X3 xDrive35i - My new snowmobile.
    2020 Estoril Blue 440i xDrive cabrio - This car is a blast to drive.

  3. #3
    Join Date
    Dec 2005
    Location
    corpus christi, texas
    Posts
    6,738
    My Cars
    No e30s, again :(
    And sometimes you can get e30 4x100 spacers on jet.com for cheap.
    No e30s again.

  4. #4
    Join Date
    Jul 2006
    Location
    Long Island ny
    Posts
    138
    My Cars
    00 Mk4 Gti
    Quote Originally Posted by richardodn View Post
    A stock size is 15x7 et24. 1/2" inch narrower would reduce the necessary inboard clearance by 1/4" or about 6-7mm. This hypothetical wheel would then be 15x6.5 et31 so your not far off. Your et38 might fit without spacers but more likely is you'll need 5 or 10mm.
    Thank you

    - - - Updated - - -

    Awesome. looks like they still have good deals on hubcentric spacers
    96' Mk3 Gti -Sold
    97' E36 M3 - Sold
    00' Mk4 Gti -current
    E30-S52 swap -some day

  5. #5
    Join Date
    Dec 2005
    Location
    corpus christi, texas
    Posts
    6,738
    My Cars
    No e30s, again :(
    I have a few sets. You just have to get a wheel stud kit, or longer wheel bolts
    No e30s again.

Similar Threads

  1. Will 18x9 ET38 Fit in Back of a E36
    By Motorsports14 in forum Tire & Wheel Forum sponsored by The Tire Rack
    Replies: 4
    Last Post: 01-12-2007, 12:56 PM
  2. Can I fit 245/35/18 on front with BBS RC ET38 and 10mm spacers
    By CrazyINP in forum Tire & Wheel Forum sponsored by The Tire Rack
    Replies: 7
    Last Post: 05-18-2006, 04:12 PM
  3. 18x9 et38 fit on E36 front with fender roll?
    By EEEEeeee36 in forum Tire & Wheel Forum sponsored by The Tire Rack
    Replies: 45
    Last Post: 04-20-2006, 12:10 PM
  4. Will an 18x7.5 et38 fit?
    By asdfbunk in forum Tire & Wheel Forum sponsored by The Tire Rack
    Replies: 3
    Last Post: 01-27-2005, 02:43 AM
  5. real quick q: 18x8.5 et38 will it fit '98 M3?
    By xjeeper in forum Tire & Wheel Forum sponsored by The Tire Rack
    Replies: 4
    Last Post: 12-02-2004, 04:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •