Hello,
Sorry if I don't make a lot of sense. I am very new to BMW's so pardon my vocabulary.
Got a car that wasn't starting but after changing starter and battery the car starts with a lot of codes and loud knocking out of the engine. Opened the valve cover and nothing seems to be off. The Vanos on the vehicle were replaced by local dealership this March. The injector dont look super bad but not sure. The sound of the engine is similar to what's in the video
https://youtu.be/pShl17Ukj0E
One thing to add though is there is a lot of smoke when I opened the oil fill cap. Before opening valve cover and injectors cylinder 4 was misfiring. Now 1 4 and 5 are misfiring. Any help will be appreciated.
Rod knock. Engine needs to be replaced.
Are you gonna eat that?
Similar is the problem. If it is near identical then a bigger problem. Which codes?
2A9A crankshaft inlet camshaft,
2a85 exhaust vanos, activation
Cda6 dme: status electric fuel pump, 335
2e1d firing, cylinder 6
2e1c firing, cylinder 5
2e1b firing, cylinder 4
29d1 combustion misfires, cylinder 5
2a80 intake vanos, activation
2a7c oxygen sensor after catalytic converter, electric
3100 boost pressure control, deactivation
29do combustion misfires, cylinder 4
29cd combustion misfires, cylinder 1
29cc combustion misfires, several cylinders
- - - Updated - - -
List of codes
2A9A crankshaft inlet camshaft,
2a85 exhaust vanos, activation
Cda6 dme: status electric fuel pump, 335
2e1d firing, cylinder 6
2e1c firing, cylinder 5
2e1b firing, cylinder 4
29d1 combustion misfires, cylinder 5
2a80 intake vanos, activation
2a7c oxygen sensor after catalytic converter, electric
3100 boost pressure control, deactivation
29do combustion misfires, cylinder 4
29cd combustion misfires, cylinder 1
29cc combustion misfires, several cylinders
Bookmarks