I needed a block to rebuild an engine. I have most of the internals for sale. Let me know what you need so I can let you know what I have. Here are some of the main engine components that I still have.
crankshaft 250
cams sold
S52 rods and pistons 150
cam trays with lifters 75
valve cover 100
M Power cover sold
Vanos unit sold
timing chain cover 75
crank pulley sold
All prices listed are plus shipping.
Let me know what you need
Thanks for looking
Michael
Last edited by peapodf50; 05-17-2019 at 09:18 AM.
Link for pictures doesn't appear to be working. Please pm for pictures if interested.
Last edited by peapodf50; 05-14-2019 at 11:10 PM.
have crank pulley?
I do have the crank pulley
Last edited by peapodf50; 05-15-2019 at 09:02 AM.
What's the condition of the cams? Are they scored?
Pm sent
Attachments aren't showing
I don't know how to post pictures with the URL. Anyone have guidance for me?
https://imgur.com/a/YPs2Pwb
I hope this works
Last edited by peapodf50; 05-15-2019 at 01:27 PM.
https://imgur.com/a/NwzM5x6
crank pulley pictures
Pm’ed you
Would you ship the valve cover to Canada
cams
vanos
M cover
all sold
How many miles on this motor? And are the trays and lifters in sound shape? Absolutely holding pressure and quiet? Do you have a primary tensioner? Thanks.
Sent from my LG-M153 using Tapatalk
132 k was on the engine. I never heard it run so I can’t attest to how it ran before. My understanding was the engine was going to have a new head gasket put on it and then put into a race car. I would assume the lifters are still good, but you never know for sure. The trays are in good shape. Can you give me a little more on the tensioner you are looking for. The chain tensioner in the cylinder head or the one for the serpentine belt?
I was looking for the primary tensioner but I bought a new today on sale at fcp. Still possible interest in the lifters and trays. Wonder if there is a way to tell if they are good and holding pressure well. Hmm.
Sent from my LG-M153 using Tapatalk
I sent you a PM for the cam trays, but I don't know if you got it. LMK if they are still available.
Hi you still have pistons and valve cover?
Do you still have the crank?
Bookmarks