I have searched but have not found others with the same issue.

My issue is the engine will crank but will not start. If I spray some kind of brake cleaner inside it still will not catch and start. The car did start twice randomly but died as soon as I put it into drive.
I am not sure what the issue is or what to do and hoped someone would be able to help

It does not throw any engine codes after I deleted them but after the car successfully started once it did throw me a couple codes:
120408: Charging pressure control: switch-off as consequence
131501: VANOS, intake, cold start: not controllable
1B0A21: Rough Road detection: no wheel speed signal received

Here is a video of the car trying to start:
https://youtu.be/AagQa5y3T9s


It does throw a few other codes which I am not sure if they are relevant or not
930910: Airbag, driver, valve, Resistance too high
C98C02: LIN bus, multifunction steering wheel communication fault
D01736: Signal (cruise control user-input status. 233.1.2) invalid, transmitted by FEM / SZL r / BDC-ZGM


Thank you!