Upper Control Arm Rubbing Wheel
Wanted to know if anyone has had this problem:
My right side upper control arm rubs on the inner rim of my 18" M pars. Recent work that prompted this is the installation of an e31 xbrace (No one else that has done this mod has reported this problem) and Moosehead Sphericals (love them).
Before this work, I never had any rubbing issues. This is evidenced by the fact that the control arm I took off has all paint intact, where the moosehead has signs it has been rubbing. I verified today that L is on the left, and R is on the right. I cannot visually see anything wrong, and comparing the old and new arms, they look identical. Only the right side rubs.
I don't quite know where to start, I had an alignment within the last 2 months (every single component of steering/suspension is brand new lemforder within those last 2 months). I did not go in for an alignment after installing the Mooseheads/xbrace (installed in the last couple weeks), is one necessary? Thanks for the help!
O o
/Ż____________________________ ______________
| BLAAAAAAAAAAAAAAAAAAAHHHHHHHH! !!!!
\_ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ ŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
Bookmarks