Passenger side windows wont respond.
I swapped the rm1, and messed with the relays in the trunk, all fuses good....
Two issues, when i threw in the new GM, all windows worked, sunroof didnt respond at all. Then the front windows all stopped working. So i swapped rm1. Now drivers front and rear window work fine. Pass is dead fr and rear. Before i swapped the rm1 both rear windows worked fine and both front wouldnt respond. So now im stuck on this issue.
Ideas? Where to look?
- - - Updated - - -
Also the modules in the door are working properly it seems.
Once you hit 100mph it all go up and rest itself
Sent from my SM-G960F using Tapatalk
F13platform, on Flickr
True, however holdingit in the lock pos, itll roll up drivers front n rear and close the sunroof. The sunroof opens to vent when i turn the key on.
Don't the the door latches have the thee micro switches inside that wear on the tips over the years I wonder if those are having a problem
Hmm. Idea i reckon. But why would the lock still operate the driversside?
Fixed sunroof. Still dead pass windows
Spent 5 hours today. It was a fuse that tested good... But apparently was not.
Last edited by Arthas; 05-05-2019 at 07:46 PM.
When you disconnect the batteries you have to initiate the windows and the sunroof when you reconnect the batteries again. How you do it I don't remember. Maybe someone can tell us?
Thankfully I fixed it. It was simply a fuse that appeared good and even tested good with continuity, but wasn't packed somehow still bad. Replaced the fuse works great
Bookmarks