Price: Sold
Kit was used for less than 5k miles. No play in the turbo shaft! Everything is in perfect condition. I'm in no rush to sell this but price is obo. Will not split kit at this time. Includes all of the following:
- Garrett GT3582R dual ball bearing turbo
- SPA turbo manifold
- Tial MVS wastegate
- Synapse blow off valve
- 24x12x3 intercooler
- Intercooler bracket
- Technica motor mount
- 60lb injectors
- Technica blowthru MAF
- Technica OBD1 turbo tune
- K&N air filter
- Technica charge pipe kit.
- Charge pipe silicone and T-bolt clamps
- All AN water and oil lines and fittings
Read more about this kit on Technica's website: http://www.enjoytechnica.com/products-page/bmw-e36-turbo-kit/bmw-e36-turbo-kit/?fbclid=IwAR3c8n-2sz0QBQNGqXDHV6nAGAUqeDcE7iTZ_ZjSd74uYeWMbHDcqU96H NU
I prefer local pickup (Greenville, SC) but will ship at buyer's expense. Technica charged me ~$100 for shipping from GA to SC, so figure this is the cheapest that shipping could be.
(Full exhaust/mufflers sold separately and not included in this sale: https://www.bimmerforums.com/forum/s...Borla-Mufflers)
Last edited by SnobordBum; 05-17-2019 at 04:56 PM.
This was ran on stock head gasket and stock head bolts? How much power did you make?
Yes, this was on the stock head gasket and stock head bolts. I ran the base tune and never got around to putting it on the dyno. It was running about 8-9lb of boost at the manifold (slightly higher pressure at the turbo). I imagine I was making similar HP to other people with this type of setup (350-400hp?).
all PMs replied to...bump
Sold!
Bookmarks