I need to code EWS Immobilizer on my car. I am using ISTA-P with K-DCAN cable. ISTA not seeing vin, it asks for Vehicle Order. Tried to configure my own by it is wrong. Anybody has an example of Vehicle Order for 2007 E66. Below is what I've done.
I am using ISTA-P with K-DCAN cable, ISTA-P is not seeing VIN so it asking for Vehicle Order file .xml. Tried to configure my own but it didn't take.
<?xml version="1.0" encoding="iso-8859-1" ?>
<vehicleOrders>
<order>
<coding vinLong="WBAHN835X7DT75632" checkDigit="2" location="" time="2008-01-11T00:00:00.000">
<checksum>FP</checksum>
<model type="HN83" buildVersion="0607">E66</model>
<paintCode>0475</paintCode>
<upholstery>ALAT</upholstery>
<options>
<option>1CA</option>
<option>205</option>
<option>xxx</option>
<option>xxx</option>
</options>
<units>
</units>
<eWords>
<eWord>B080</eWord>
</eWords>
<hoWords>
</hoWords>
</coding>
</order>
</vehicleOrders>
Been looking for example for E66, any help would be appreciated
as mentioned by an expert in the software forum: Don't do it. ISTA-P and K-DCAN will brick stuff. That car needs ICOM with MOST adapter to use ISTA-P safely. Use WinKFP and NCSExpert
Shogun tricks and tips for the E32 series are HERE!
Hello everyone,I am new to this forum and i am looking for some assistance .I need to flash the egs module on bmw 535xi 2008 with ista p but unfortunately ista doesn't read the vehicle order of the car.I tried to flash the egs through winkfp but it always failing so my only solution is ista p .Can anyone assist me by creating the vehicle order of the car and importing to ista P .Of course i am willing to pay for the service please if anyone can help let me know .
Bookmarks