22mm Dinan front sway bar with powerflex poly bushings, approx 2000mi on the bushings. SOLD
E30 aluminum LCA's new just used one for a test fit, made by Moog. SOLD
6 speed trans cross member SOLD
TC Kline SA's approx 4000 - 4500 mi on them, never used in the winter never tracked. #400 front springs. SOLD.
Innovate A/F and boost/vacuum gauges installed shortly before removing the FI engine. SOLD
E36 power steering cooler, pump line and reservoir, 1 month old, over $230 new. This is a nice addition to an M Roadster/Coupe $130.00 shipped.
Billet aluminum Rad cap, Master cylinder cap, Diagnostic cap and oil filler cap. I'm not sure who made them but I've only seen a couple sets, very high quality pieces! SOLD.
Apex Arc-8 wheels and the tires will be removed. Fronts 18x9.5 et35 - rears 18x10.5 et 27. One of the fronts has a small chip and one of the rears has some scuff marks other than that they are in very good condition, not bent. $700 + shipping
I'm open to reasonable offers, I need this stuff gone since I done have room to store it or can't be used on the car.
More to come!
Last edited by Z3 M Roadster; 12-01-2019 at 01:58 PM.
Interested in sway bar
Sent from my iPhone using Tapatalk
Whats your zip and i'll get a shipping quote.
89128
Sent from my iPhone using Tapatalk
You have a pm.
Whats the price shipped for that crossmember?
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
It's now sold!
Last edited by Z3 M Roadster; 03-18-2019 at 03:45 PM.
More items added.
More items added!
No rear springs or perches?
It's a shot in the dark, but if you're willing to sell just those rear Konis, I'm interested.
96 320i Touring
98 Z3 2.8 Roadster
01 PY M Coupe
96 Z3 1.9 - DASC
95 318ti Clubsport
94 Miata M-Edition
13 smart fortwo
Pmd
thanks for the reply...
Updated wheel photos.
Any issues with fitting those 9.5” upfront?
Sent from my iPhone using Tapatalk
I only had a slight rub when doing a tight turn and goin up an incline. To remedy it i used a heat gun on the fender liner and the problem was solved.
Lowered the price on the Apex wheels.
Last edited by Z3 M Roadster; 12-01-2019 at 02:00 PM.
Weekend bump.
Bookmarks