Looking for help from any of the V12 gurus on the forum. I got a code for a bad evap valve and I can't find the location of the Evap purge valve in the M73 engine.
Thanks for your help!
It's the pair of loud clicking mechanisms next to the oil filter. One for each bank.
---- Processing Individual ----
Z1XX Upholstery
Seats front and back in Epingle / leather englishgruen,
As Schl.Nr. B9EG.
Front seat backrest in Montana Englishgruen (No. 8 174 861)
Other interior equipment as for Volleder Nappa englischgruen,
Schl.Nr. P5EG
Thanks! I circled them in white. Are those it?
I had read reports on how to change them in the V8s and this is much better!!!E38 M73 Engine.jpg
Usually referred to as Tank Vent Valves. If the labels to their connectors are still present, they state which bank they are for, as each is controlled by its DME. Worth checking the connectors haven't been interchanged.
Thanks for the help. Yes, there are labels still on the connecting wires. Thanks guys! Not a lot of literature online for the M73s. Thanks!
See if these help:
http://bmwfans.info/parts-catalog
https://www.newtis.info/tisv2/a/en/
Funny but I had to replace both of those puppies, one after another in the span of few hundred miles.
Sent from my VS995 using Tapatalk
chrisn7, thanks for those links. Invaluable!!!
I am replacing both as well. Thanks for everyone’s help!
Bookmarks