I have a few that need replacing like the coolant level and the radiator temp connectors. They are just falling apart. realoem wasnt much help. Anyone know the part numbers for these and any others?
1987 BMW 325i Convertible
“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”
Jeremy Clarkson
None of these match?
http://www.realoem.com/bmw/enUS/show...diagId=61_0534
The problem is some are more than half missing... like the coolant level one. I cannot even tell what connector is supposed to be there. That is why i was asking.
1987 BMW 325i Convertible
“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”
Jeremy Clarkson
These are the contacts for most of the 2.5mm connectors in the car. Most of the 2 circuit connectors use these:
http://www.realoem.com/bmw/enUS/show...diagId=61_2489
The housings are number 5 and 6 which come in different keyed forms depending on the location:
http://www.realoem.com/bmw/enUS/show...diagId=61_0534
You can order different keyed versions by changing the last digit of the part number like this:
61131378401
61131378402
61131378403
Number 7 uses the same contacts, but has 3 positions for the AUX fan sensor switch in the radiator:
http://www.realoem.com/bmw/enUS/show...diagId=61_0534
This is the p/n for the expansion tank level sensor connector housing:
https://www.fcpeuro.com/products/bmw...ng-61131378408
It should use the same 2.5mm contacts linked above.
Thank you very much!!!!
1987 BMW 325i Convertible
“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”
Jeremy Clarkson
Bookmarks