Results 1 to 6 of 6

Thread: Problems with S-EDC , E38 Facelift

  1. #1
    Join Date
    Aug 2012
    Location
    Ohama
    Posts
    6
    My Cars
    BMW 330i

    Problems with S-EDC , E38 Facelift

    Hello Guys

    I've bought an 740i from 2000, one of the reasons i bought the car was the cool feature S-EDC. But unfortunately it doesnt work.
    When I put the Car in Ignition, the Light lights up for a short time and after that i cant enable the function.

    I checked the ECU in the glove box, did a reconnect. After that I cleared the errors on the edc module and recoded it. I couldnt believe it, but after those steps i could enable it and
    I also noticed the comfortable suspension. Before it was always on Sport-Mode. So i could switch the modes.

    The next day, i wanted to test it again , but it didnt work anymore. I also did a Steering Angle Reset, but no Luck.

    Attached you see the errors, does someone has an idea ? EDC Module defective?

    Thanks in Advance
    IMG_20190216_195925.jpg
    IMG_20190216_200002.jpg
    IMG_20190216_200013.jpg

  2. #2
    Join Date
    Dec 2016
    Location
    Springfield, VA
    Posts
    1,005
    My Cars
    2001 750iL DD74441
    No personal experience but I would say your speed signal is off. Should be front left wss.

    https://www.meeknet.co.uk/e38/EDC_III_Plus.pdf


    2001 750iL DD74441
    Stock

    RIP: 2003 540iA Sport GS56111
    H&R front springs, Ultimate Cup Holder, Euro Dash & Armrest, Grom, BavSound Stage1

  3. #3
    Join Date
    Aug 2012
    Location
    Ohama
    Posts
    6
    My Cars
    BMW 330i
    Thanks for your input, but in my opinion the sensor is good, because i didnt have any DSC/ ASC Errors on my instrument cluster, even if i read out the DSC Module, there are no errors.
    I think my Module is defective

  4. #4
    Join Date
    May 2009
    Location
    Lithuania
    Posts
    178
    My Cars
    E38 750i FL & E36 M3 4DR
    OT question - What is your diagnostics setup? Reason for asking is that I cannot connect to EDC module with neither software, INPA, DIS, none of these would pick it up. All other modules can be read with no issues though.

  5. #5
    Join Date
    Aug 2012
    Location
    Ohama
    Posts
    6
    My Cars
    BMW 330i
    Its important that you use Ediabas 6.43 or 6.47 (INPA 5.01) and you need an ADS Cable, you can buy it here:
    https://doitauto.de/ads-obd-diagnose

    You cant connect to EDC via KDCAN

    Regards

  6. #6
    Join Date
    May 2009
    Location
    Lithuania
    Posts
    178
    My Cars
    E38 750i FL & E36 M3 4DR
    Quote Originally Posted by Edmond357 View Post
    Its important that you use Ediabas 6.43 or 6.47 (INPA 5.01) and you need an ADS Cable, you can buy it here:
    https://doitauto.de/ads-obd-diagnose

    You cant connect to EDC via KDCAN

    Regards
    Did you manage to connect to EDC module using DIS diagnostics software?

Similar Threads

  1. E38 E38 facelift Xenon headlights for sale
    By E38bimmer in forum Exterior Lighting & Body Parts
    Replies: 5
    Last Post: 05-16-2013, 01:29 PM
  2. E38 E38 Facelift Headlights
    By M I C H A E L in forum Exterior Lighting & Body Parts
    Replies: 4
    Last Post: 04-26-2013, 09:24 PM
  3. E38 WTB 2001 E38 facelift parts (tails, corners...)
    By serious7series in forum BMW Parts Wanted
    Replies: 0
    Last Post: 12-26-2012, 10:22 AM
  4. E38 WTB e38 facelift headlight glass
    By km911 in forum BMW Parts Wanted
    Replies: 1
    Last Post: 01-27-2010, 08:06 PM
  5. Tranny Problem Not Limited To E38
    By wolffbimmer in forum 1995 - 2001 (E38)
    Replies: 24
    Last Post: 11-13-2009, 04:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •