SOLD
I am selling my Motorsports Concepts S50 CSL style carbon fibre airbox. This is for the Euro engine, not the North American engine.
http://store.motorsportsconcepts.com...e36-m3-37.html
I have run this for a few summers now and have decided to swap in an S54. The airbox is in great condition, there are a few minor marks down on the back corner approx by the brake booster due to swapping the Teves MK60 setup in. The inside, sealing edges, fastener holes, and hose ports are all perfect, as is the top surface with the exposed carbon weave. I will include the oem BMC CSL panel filter.
Will ship anywhere in the world, extra care will be taken for packaging.
Description from the manufacturer
"The S50 CSL Carbon Airbox is made of 100% carbon fiber. It is similar to the S54 airbox in that it consists of 2 pieces, airbox and snorkel, and uses the S54 CSL internal air filter. This airbox is best used with Alpha N type engine management. The air filter is easily replaced by removing the snorkel. The airbox utilizes tuned intake runners and larger plenum volume (Helmholtz resonance) to effect a power gain. The engine will have a more aggressive intake note and a better throttle response. The airbox works particularly well with uprated cams."
Here is a link to a sound bite I made a couple years ago.
Thanks for looking
Last edited by SPhilly28; 02-13-2019 at 10:41 PM.
1995 Japan Spec 318is Slicktop, S54B32, ZF 5MT, Typ 210 3.25:1 FD, CSL Carbon airbox, Supersprint V2 stepped headers, Bimmerworld/Magnaflow 3" race exhaust, CAE shifter, JBR lightweight flywheel, Clutchmasters Kevlar clutch, MCS 2 ways w/ rear coilover, Hyper Coils, Ground control plates, Turner bars, Turner camber links, BW roll center correcting control arms, GC bump steer tie rods, Road Race GT strut bar, Mason Engineering GTR rear brace, Stoptech ST40 brakes, Hawk pads, Apex EC-7 18x10, RE71R 285/30/18, Hard Flares.
www.isiautomotive.com
very nice!!
Here's a pic installed
1995 Japan Spec 318is Slicktop, S54B32, ZF 5MT, Typ 210 3.25:1 FD, CSL Carbon airbox, Supersprint V2 stepped headers, Bimmerworld/Magnaflow 3" race exhaust, CAE shifter, JBR lightweight flywheel, Clutchmasters Kevlar clutch, MCS 2 ways w/ rear coilover, Hyper Coils, Ground control plates, Turner bars, Turner camber links, BW roll center correcting control arms, GC bump steer tie rods, Road Race GT strut bar, Mason Engineering GTR rear brace, Stoptech ST40 brakes, Hawk pads, Apex EC-7 18x10, RE71R 285/30/18, Hard Flares.
www.isiautomotive.com
Bookmarks