Results 1 to 1 of 1

Thread: NCS EXPERT Hardtop Detection CVM error

  1. #1
    Join Date
    Feb 2019
    Location
    Romania
    Posts
    1
    My Cars
    BMW Z4 E85 3.0i

    Coding CVM for Hardtop Detection error 2060

    Hello,

    I am new here and I need help.
    I am trying to code CVM module using NCS Expert to activate Hardtop Detection and I get error 2060. I was able to code GM5 for different functions but not CVM. What I’m trying to do is to activate the option where the ECU detects the hardtop. Basically disable the buttons (Open/Close soft top) when the hardtop is on the car. NCS Expert reads CVM but can’t write the new values (.MAN file). Is there another option or special settings which needs to be activated together with HARDTOP DETECTION?

    Pictures with errors here:https://www.dropbox.com/sh/q1lkyv1fp...NOiBw6fDa?dl=0


    Last edited by mex777; 02-12-2019 at 11:01 PM.

Similar Threads

  1. NCS Expert 3.1.0 error with my E61.
    By Pichuks in forum 2004-2010 (E60,E61)
    Replies: 0
    Last Post: 10-03-2017, 10:42 AM
  2. NCS Expert Vin is faulty error
    By Peter666555 in forum Diagnostic Software
    Replies: 2
    Last Post: 07-29-2017, 09:13 AM
  3. NCS Expert IHKA Module Reading Error - E39
    By rao in forum Diagnostic Software
    Replies: 0
    Last Post: 10-11-2013, 06:31 PM
  4. NCS Expert - 'Chassis is faulty' error
    By PliSsK in forum Diagnostic Software
    Replies: 8
    Last Post: 07-24-2013, 02:34 PM
  5. NCS Expert error: "Error in CABD!"
    By delithdra in forum Diagnostic Software
    Replies: 11
    Last Post: 12-25-2012, 05:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •