Just pulled out the internal fuel pump hanger and saw that a piece
had cracked. I’m pretty sure it’s a positive or ground connection.
Anyways I was able to pinch it in place for a quick fix, I wanted to know if I’m able to solder it back together?
Didn’t take a pic of the actual part so here’s one that I took from online that cost 130$ that I don’t want to spend.
19C02D1B-9D62-44C3-988D-064ABA3C3B50.jpeg
Thanks in advance!
should be repairable, I replaced some internal tank wires on my E32 with new wires and soldered them. Looks like that parts is bolted on, so make a wire with 2 ring terminals
Shogun tricks and tips for the E32 series are HERE!
thats a bonding cable (ground) and you can repair it, even if it's just crimping.
also it should be noted that the pump is not entirely necessary, but living in texas during august means you should probably keep it working.
Tom D
77 e21 - m42
88 e30m3
04 330 dinan3
84 r1000rt
02 r1150rs
all of them gray
14 f800gsa - red headed stepchild!
A Weld would work,,I went with Airtex as the electric fuel pump motor is replaceable plus Airtex has lifetime warranty.
https://www.bimmerforums.com/forum/s...l-Pump-Rebuild
Randy
Last edited by 320iAman; 02-11-2019 at 01:11 PM.
Thanks fellas! Looks like I have some new plans for Saturday.
Slowly but surely getting this bad boy ready to make its return to the streets!
Bookmarks