Member
Unless I missed something Bentley is silent on rear main seal R&R. Based on feedback here, I bought the retainer with seal pre-installed kit. I can do a feels-about-right bolt tightening but would rather not to if specs are available. Thanks.
Member
6mm bolts are 10 Nm torque setting
1999 2.8L Z3 Roadster,
2000 3.0L Z3 Roadster,
There is only one thing more pleasurable than working on a Z3, that's driving it top down on a fine day.
Member
Try www.newtis.info.
Diesel Fitter
1AZ Timing case and timing case cover top and bottom M6 10 Nm M7 15 Nm M8 22 Nm M10 47 Nm
2AZ End cover, front/rear, to engine block M6 10 Nm M8 22 Nm
3AZ Bearing pin to timing case cover M51 / M41 / M47 M42x1.5 65 Nm
4AZ Screw plug or connection piece to timing case cover
Screw plug to timing case coverM51 / M41 / M47 M20x1.5 30 Nm Screw plug to timing case cover M57 / M47TU / M57TU M30x1 70 Nm Screw plug to timing case cover
| 5AZ | End cover, top/rear (water jacket), to engine block |
| 6AZ | Lower timing case cover to crankcase |
| 7AZ | Upper timing case to cylinder head |
| 8AZ | End cover, rear, to crankcase |
Originally Posted by B4SH
Posting Permissions
Reply With Quote
Bookmarks