Page 2 of 2 FirstFirst 12
Results 26 to 38 of 38

Thread: OBD1 Heatshield Vanity Covers

  1. #26
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Prototype is in the mail! Finally.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  2. #27
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    I took 30 pictures and some turned out better than others.


    Prototype fits perfectly.

    I will be checking it in car tomorrow, wiring and all and we will run the complete set.
















    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  3. #28
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3

    OBD1 Heatshield Vanity Covers

    Did a test fit on a car with an oem coil harness it fits.

    I’m going to add a couple mm of clearance around the harness.

    Going to order the full run of these on Monday. Preorder will stay for 2 more weeks.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  4. #29
    Join Date
    Oct 2005
    Location
    Northern California
    Posts
    3,138
    My Cars
    95 M3, 15 Golf TDI wagon
    Am I the only one who cannot see the pictures?

    -WTB: OEM Class 2 LTW GT wing with risers- Mazak

  5. #30
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Quote Originally Posted by 3literheater View Post
    Am I the only one who cannot see the pictures?
    I can see them on all of my devices, you can check the pics here too:

    http://www.22rpd.com/item.php?item=34


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  6. #31
    Join Date
    Jul 2002
    Location
    Long Island, NY
    Posts
    7,523
    My Cars
    98 Turbo M3, 04 E53 X5
    Any option to add the M logo?

    98 Fern Green M3/2 - Precision 6870/AR Designs Twin Scroll/RK/E85
    2017 Toyota Tundra Crewmaxx - Family Whip
    2011 Pierce 75' Quint - Fire Apparatus West Islip FD

  7. #32
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Quote Originally Posted by NY98M3 View Post
    Any option to add the M logo?
    On these we are planning on making them without the m.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  8. #33
    Join Date
    Feb 2016
    Location
    Rogers AR
    Posts
    4,426
    My Cars
    1995 BMW M3
    Looks good!

  9. #34
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Heat shields have shipped from the MFR to us, should be shipping from us shortly.

    Pre-sale pricing will end 5/5/2019 11:59pm PST
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  10. #35
    Join Date
    Feb 2017
    Location
    Minneapolis, Minnesota
    Posts
    273
    My Cars
    1995 BMW 525i/5
    Quote Originally Posted by vollosso View Post
    Heat shields have shipped from the MFR to us, should be shipping from us shortly.

    Pre-sale pricing will end 5/5/2019 11:59pm PST
    You'll let us on that list know when we need to pay up, right?

    Sent from my Pixel 3 XL using Tapatalk
    '95 E34 525i, M50B32 (S52 Crank, K1 Rods, JE 9.0:1 Pistons, S52 Cams, Cutring, Achilles Oil Pump Shaft & Sprocket), GTW3684R 0.82A/R, ZF320

  11. #36
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Callmepuff,

    Apologies on the delay here. I thought I replied to this already.

    if you could go to the website, link: http://www.22rpd.com/item.php?item=34

    And order through there ill leave the presale pricing up for you guys. Ill message everyone to confirm.
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  12. #37
    Join Date
    Jan 2018
    Location
    Danbury
    Posts
    3
    My Cars
    E36 325ic
    So do we get the presale pricing? Sorry haven’t received notifications from this thread

  13. #38
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Quote Originally Posted by DanKeen325ic View Post
    So do we get the presale pricing? Sorry haven’t received notifications from this thread
    Yes, its still up on the link above.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

Page 2 of 2 FirstFirst 12

Similar Threads

  1. ///M Engraved Vanity top Mount Heat Sheild for OBD1/OBD2 Valve Covers
    By 1SLWM3 in forum Forced & Chemical Induction Parts
    Replies: 3
    Last Post: 06-04-2014, 11:59 AM
  2. E36 OBD1 coils, M50 and S50 (BMW M Power) vanity covers
    By z25is in forum Engines, Performance Parts & Software
    Replies: 11
    Last Post: 11-20-2012, 03:16 PM
  3. wtb: e36 obd1 m3 valve cover
    By tybmw in forum BMW Parts Wanted
    Replies: 4
    Last Post: 08-27-2004, 12:16 PM
  4. WTB: AA heatshield w/ cover
    By JoeOner in forum BMW Parts Wanted
    Replies: 5
    Last Post: 08-03-2004, 08:10 PM
  5. Wtb: Mint Obd1 Fuel Rail Cover
    By marc1119 in forum BMW Parts Wanted
    Replies: 3
    Last Post: 04-21-2004, 07:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •