Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
Great stuff man, nice build good to see people doing clean E36s still.
IG @Bsaintmedia | Cammed LS6 Swapped E36 M3 "The GMW M3"
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
Nice just got into a low mileage M3 and doing the same....picking up a turbo this weekend.
Making this M3 into what my 328is never was over the last 11 years lol.
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
So update. Chase bay power steering kit is working great. Ended up replacing my pump and upgrading my terrible progressive 95 steering rack to a z3m rack and wow steering is amazing. Also removed the brembo brakes and went back to stock. Did this as I wanted to run ltw wheels and couldn’t with them and also have acquired a large amount of pads and rotors for stock brakes.
Next found a nice strait set of ltw wheels which will be the daily wheels least for now lol.
Next picked up a powder coated reinforced rear subframe and just loaded it with garagistic street Polly bushings
Sent from my iPhone using Tapatalk
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
The new wheels restores the classic look. Nice.
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
Love the new wheels too! How are you liking the exhaust?
93 325is: obd2 M52, 22rpd tuned, 6266, RSI manifold, 555whp on 18psi
Will you dyno the car with the cams? I am extremely curious as to what it'll make. Keep up the great work!
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
So few updates. Finally got my mashaw ltw spoiler mounted right before winter storage. Also sent the ltws out for refinish (hence the pics on the old asa wheels). Also started collecting a few bits to put on next spring and also have a big change in process. Boost v2 is about to go down
Sent from my iPhone using Tapatalk
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
Lookin sharp
CARS
02.92 325is / 06.72 2002 / 02.91 XJ / 08.04 R53 JCW
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
I like
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
So crazy couple months.
First ended up as usual changing my vision of the car and swapped wheels. Back on some apex arc8s though these are 17x9 245/40 squared. Absolutely love the stance
Also installed the carbon lip
Than stuff went south. Was really noticing car did not feel powerful and also had a lot of initial vibration. Finally did a compression test and found cylinder 2 dead. Guessing when I was having super charger struggles and ran insanely rich washed a cylinder. Either way had a bad motor
Luckily got a amazing deal on a 85k s52. Swapped my vanos cams clutch setup and resealed and got the motor back in the car in a week or so. Just got her back up and running feels million times better
Sent from my iPhone using Tapatalk
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
You changed your Wheels like other People her underwear. But i like it. Nice Car, nice Wheels.
The ASA Wheels in Post 38 are these 17 oder 18"?
Last edited by TigerJohnny1974; 03-29-2020 at 06:06 PM.
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
So figured wanted to update this. Its been a crazy 8 months (outside of everything else being crazy) So new to me motor made it a wopping 150 miles before this
Recent updates by thedude60526, on Flickr
- - - Updated - - -
So ripped it out tore it down found some trashed crank bearings, clogged coolant jackets. Basically you always gamble going used so I was done, time for a new motor.
Recent updates by thedude60526, on Flickr
- - - Updated - - -
So used my two torn down motors took them to machine shop. Ended up with 87mm 11:5:1 je pistons, supertech valve springs to go with my 276/270 cams, 24lb injectors, arp hardware, baffled oil pan, oil pump wire nut, stewart water pump, aa long tube headers
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on FlickrRecent updates by thedude60526, on Flickr
- - - Updated - - -
Also added some other new items. Found a e46 m3 6 speed so installed that with a new coolerworx chassis shifter.
Recent updates by thedude60526, on Flickr
Also before putting the motor in gave the bay a quick coat of paint and added some DEI insulation
Recent updates by thedude60526, on Flickr
- - - Updated - - -
So recently got the motor in and finally started getting miles on it. currently at 350. Hoping this one hangs on for a while. Feels amazing. Side note converted to obd2 and running a custom Kassel tune
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
- - - Updated - - -
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Also just fitted some wider 255/40 17 re71s for some up coming events
Recent updates by thedude60526, on Flickr
Recent updates by thedude60526, on Flickr
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
Well done. Looks great
Love it . High comp with cams, and proper exhaust should make some good NA power.
Any plans to get it dyno tuned
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Washedit1 by thedude60526, on Flickr11/10's Racing
94 325i #36/64 TEAM PENISTON OILS/ LARSENS BISCUITS
Bookmarks