Anyone have one of these laying around that needs a good home?
And the application? 3HP22?
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Getrag 265
Sent from my LGLS755 using Tapatalk
265/5 or 265/6?
And are E24 or E30 ones that different?
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
265/6 I have the E28 one and it won't work. I've thought about getting some flat steel, then cutting two pieces, drill holes and "extending" the E28 one.
Sent from my LGLS755 using Tapatalk
Last edited by motohunter4; 01-28-2019 at 03:30 PM.
The E23 265/6 crossmember is unique and rare as hens teeth.
If you can fabricobble something, just do it while you search for a real one.
I have one in my 735, and it will be coming out eventually, but I doubt I would part with it due to the rarity.
Ivo would also be a good source since there were more E23 with a 265/6 in Europe than here.
--Jay3->Sic gorgiamus allos subjectatos nunc
84 €735i manual, 88 528e/i
Motronic 1 and 1.3 wiring
Transmission & Diff gearing sheet
ebay.de is the place, start brushing up on German.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Querträger. Been looking. Fabricobble it is for now.
Sent from my LGLS755 using Tapatalk
I made one for my car. Easy if you have a hack saw and some decent welding skills. Used 1 inch angle iron pieces.
Bookmarks