Those clips you have pictured (51711910956) clip on the outside end of the piece which you have pictured in your first post. They then clip into an opening on the bumper cover. To insert the piece pictured above, first insert the end with the two extensions into the piece with the license plate, then rotate the cap into place and that clip clicks into a slot on the bumper cover.
CSi #18 - Car & Driver Magazine 1994 actual test car
-- Hellrot/Black-Gray (1 of 1 NA CSi color combination)
BMWCCA E31 Chapter International Clubs Liaison
North America Representative, 8er.or Board of Directors
Bookmarks