There is no power to pin #3. Already tested on drivers side and there is power but none on passenger side. Can i splice the cable from drivers side and run a cable to passenger side so that my xenon headlight can turn on ? Or will that fry my footwell module ? Im trying to avoid buying a module if i could.
I connected both headlights to drivers side and both turn on great, just that passenger only turns on halogen h8 light and D1S doesnt turn on. Any help is much appreciated.
You need to pull both headlights swap the modules then see what happens. If the othe headlight acts up after the move then replace the module it will have to be coded to work
Just what i was fearing to do. Thank you for your help.
Bookmarks