What is this tool?

[OregonMTB]

See picture. It is from the tool kit of an 89

[kojo96]

Some kind of center cap lock tool- Not factory part.

[Bert Poliakoff]

+1 Maybe a wheel lock tool of some sort? I think Kojo is on the right track

[de Witt]

Looks like a security driver for bolts with the matching pattern. Probably for the hubcap/cover/whatever as mentioned.

[OregonMTB]

OK--time for another challenge--what is this tool? It is about 9 1/2 inches long.

[shogun]

did you already check in the owners manual/handbook ?

[Dschart]

You will need that one to turn the spark plug socket that is 3 slots to the starboard in the tool tray.

Sent from my SM-G900V using Tapatalk

[tschultz]

Also works to align the wheels onto the hub before you tighten the lug bolts.

[terrystu]

Coincidentally, same length as mine. lol

[mxl556]

See picture. It is from the tool kit of an 89

It is a center cap tool for Borbet wheels (centercap screw).

Max

[shogun]

yes, costs EURO 12.50 https://www.borbet.de/de/shop/
Deckelsicherung Design A, Ausschließlich zur Befestigung des Nabendeckels von Design A (alt) geeignet. = works only old the old design A cap

[DaHose]

Hmmmm ...... The pins on the linked Borbet tool are evenly spaced around the edge, with a centering "nub". The tool in the picture has offset teeth, with no centering nub. I still think it is a wheel center wrench, but not sure it's for Borbets.

Jose