See picture. It is from the tool kit of an 89
Some kind of center cap lock tool- Not factory part.
+1 Maybe a wheel lock tool of some sort? I think Kojo is on the right track
81 Euro undergoing total nut and bolt restoration
pictures at: flickr.com/photos/bertsphotos
Looks like a security driver for bolts with the matching pattern. Probably for the hubcap/cover/whatever as mentioned.
OK--time for another challenge--what is this tool? It is about 9 1/2 inches long.
did you already check in the owners manual/handbook ?
Shogun tricks and tips for the E32 series are HERE!
You will need that one to turn the spark plug socket that is 3 slots to the starboard in the tool tray.
Sent from my SM-G900V using Tapatalk
Also works to align the wheels onto the hub before you tighten the lug bolts.
Coincidentally, same length as mine. lol
1985 M635csi purchased new.
"Voters will always choose the beautiful lie over the uncomfortable truth."
yes, costs EURO 12.50 https://www.borbet.de/de/shop/
Deckelsicherung Design A, Ausschließlich zur Befestigung des Nabendeckels von Design A (alt) geeignet. = works only old the old design A cap
Shogun tricks and tips for the E32 series are HERE!
Hmmmm ...... The pins on the linked Borbet tool are evenly spaced around the edge, with a centering "nub". The tool in the picture has offset teeth, with no centering nub. I still think it is a wheel center wrench, but not sure it's for Borbets.
Jose
1987 M6
Livin the dream!
Bookmarks