It’s lighter than I planned on. So it’s 150lbs less than with the LS. Porsche 930ish weight distribution. This is with the hood and bumpers hanging. I have less than 50lbs is misc. stuff to go in still.
Sent from my iPhone using Tapatalk
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
I’ve got the biggest available front sway bar and no rear to start. I’m sure there will be adjustments.
Sent from my iPhone using Tapatalk
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Hater haha
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Wow! I’ve been waiting to see a build like this.
https://youtu.be/p6pQbhMFwkU
https://youtu.be/PiZfJgeWdro
Sent from my iPhone using Tapatalk
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Beautiful!
Diving in at the shallow end!
Dang, incredible!
https://www.thedrive.com/news/29886/...ow-light-again
Sent from my iPhone using Tapatalk
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Very well done - you're famous!
Congrats on the feature!
Been working on fine tuning the motor/inverter. Almost time for some slicks.
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Holy carp!
Diving in at the shallow end!
Nice build, and killer 1/4 mile!
Hoping to knock a couple more tenths off this week.
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Fits like a glove...
Don't forget the video!
Getting close. Had to re-tune the inverter for the taller tires. Just a couple more tweaks and it'll be at my goal of 10.xx 1/4 and 2.xx 0-60 on the street.
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
That’s plenty fast especially on a not prepped surface.
does that show your 60’ time?
Yea it does. That was 1.81.
Sent from my iPhone using Tapatalk
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Just stumbled onto this build. Have you upgraded the batteries since you finished this build?
Bookmarks