Howdy! Anyone know how I need to setup my Aim Solo DL to properly capture and display rpm, speed, and gear? Car is an e36 with 5-speed, s54, 3.64 gears
Video is example of what it currently shows. The gear is always off
https://youtu.be/nMGfcvZ-fmg
Thanks!!
Sent from my iPhone using Tapatalk
1999 e36 M3 with S54 and full cage (for sale!)
If you dont get very far here, try rennlist.they have a subforum inside the track section that is for data analysis that is very active.
Your AIM should be capturing GPS speed by itself, but not sure how to capture RPM signal from an e36. Once you have the RPM, gear should be able to be autocalculated, but not familiar with the AIM Solos in specific.
How are you currently reading rpm? Is it from the OBD2 port? I have a similar swap, but I have a regular Solo left over from my OBD1 days. I've been wondering what info was available from the OBD2 with a S54 swap if I were to step up to the DL. With the manual, there is no way to automatically get gear selection from the car, but as posted above, it may be possible to set it up in a math channel somehow. I need to study on that one some...
'95 M3 S54 Track Toy
'19 X5 40i M-Sport
'16 Cayman GT4
‘23 GR Corolla
Have you plugged it into Race Studio software? You answers have been all answered through AIM's youtube channel if you google. Found this gear setup thread here:
https://rennlist.com/forums/data-acq...a-solo-dl.html
ProCoach walks through all of the steps in Post #2.
Last edited by monochrom3; 12-26-2018 at 10:07 PM.
1999 e36 M3 with S54 and full cage (for sale!)
Check out the Aim Sports User Group on Facebook. Lots of expertise on there.
Bookmarks