Results 1 to 3 of 3

Thread: E83 X3 Lens replacement

  1. #1
    Join Date
    Jan 2018
    Location
    Denver, Co.
    Posts
    40
    My Cars
    1995 M3 Coupe 2005 X5

    E83 X3 Lens replacement

    I found a lens to replace the cracked one on our X3 as the entire assembly is very expensive. I would welcome any tips on removing and replacing the lens i.e. dangers, proper adhesives, other concerns. The headlight has held up for over a month with only tape covering the golf ball size hole we got when we hit a deer. There is one video on the net regarding the procedure I just thought I would overengineer the project by calling out for additional advice. I was as much ammo as I can get before I battle this little task. BTW a new zenon assy is like over $2,400 from the dealer.

  2. #2
    Join Date
    Sep 2005
    Location
    Peoria, AZ
    Posts
    7,696
    My Cars
    03 zhp, 97 e36m3, 04 zhp
    Bake the housing in an oven at 250 F for 6 minutes, it should be enough to soften the adhesive and allow you to remove broken clear plastic.

  3. #3
    Join Date
    Mar 2006
    Location
    parker, co
    Posts
    115
    My Cars
    M3 E36, 2007 X3
    Quote Originally Posted by Mless5 View Post
    Bake the housing in an oven at 250 F for 6 minutes, it should be enough to soften the adhesive and allow you to remove broken clear plastic.
    Thanks for your reply to my post. I appreciate the feedback. I have an M3 E36 also and love it.
    m3x3x5

Similar Threads

  1. X3 E83 Fuel Filter Replacement
    By schrodter89 in forum 2003+ X3, X4 (E83, F25, F26, F97, F98, G02)
    Replies: 14
    Last Post: 07-21-2019, 07:17 PM
  2. 2010 X3 E83 Headlight Lens replacement
    By Silovich in forum 2003+ X3, X4 (E83, F25, F26, F97, F98, G02)
    Replies: 4
    Last Post: 11-02-2018, 11:13 AM
  3. 08 E83 X3..3.0si .. N52 engine.. Need to replace oil separator / crank case vent..
    By tpstaples in forum 2003+ X3, X4 (E83, F25, F26, F97, F98, G02)
    Replies: 2
    Last Post: 04-27-2018, 09:27 AM
  4. e83 x3 ball joint replacement, need pressed?
    By blackout23 in forum Suspension Tech and Handling sponsored by eBMWParts.com
    Replies: 0
    Last Post: 02-14-2013, 06:24 PM
  5. Need to replace front driveshaft on E83 X3 - Why do I need to swap output flange
    By croat in forum 1999+ X5, X6 (E53, E70, E71, F15, F16, G05, G06)
    Replies: 0
    Last Post: 12-13-2012, 02:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •