Saw a relatively clean but high mileage 535i/5 on CL if anyone is looking. Located in Allentown, PA.
https://allentown.craigslist.org/cto...762417124.html
seems to have been well cared for and in decent overall shape with many new parts... that's a very good ad whoever did it... good luck with the sale I'd feel confident in buying that.. for reference I had full front floorboards on both driver and passenger side welded in for $550 .. this shop owner permitted me to remove the interior down to access the floors which each had basically nothing left and he ground away to good metal and correctly formed replacement sections on his body panel forming machines and welded them in..
however if the holes mentioned above are just the original body paint drain holes where plastic caps fit which often rust away I also had a safety inspection fail with the claim they could permit exhaust to enter the cabin which is of course absurd with three inches of dense foam and carpet above but I just grabbed a small sheet of metal from Home Depot and JB Welded it over that and that was good enough to pass.
Bookmarks