Tried to start my e90 320i after 5min after shutting it off.
battery is good, no crank.
Scan the car with INPA got the following,
Can anyone help on this, thanks.
E R R O R M E MO R Y
-----------------------
Date: 11.12.2018 19:07:34
Model: E89X
Scope: all control module
JobStatus: OKAY
Quantity: 16
-----------------------------------------------------------------
ADR Gen. name JobStatus
92 VIRTSG92 ERROR_ECU_SERVICE_NOT_SUPPORTED
-----------------------------------------------------------------
ADR Gen. name JobStatus Number of errors
Error code Kind of error
00 JBBF OKAY 1 Error stored
A6DF 64
01 MRS OKAY No Error stored
12 DME/DDE OKAY
No Error stored
18 EGS OKAY 1 Error stored
CF1F 24
29 DSC OKAY 2 Error stored
D357 24
D35A 24
40 CAS OKAY 1 Error stored
A0B4 60
41 DWA OKAY No Error stored 50 SINE OKAY No Error stored
56 FZD OKAY 5 Error stored
A669 22
A66E 22
A66A 22
A668 22
A670 28
60 KOMBI OKAY 2 Error stored
A3AA 20
931B 24
62 MOSTGW OKAY No Error stored 63 MASK/CCC OKAY No Error stored 64 PDC OKAY No Error stored
72 FRM OKAY No Error stored
78 KLIMA OKAY 2 Error stored
9C4B 68
9C52 68
Dear Sirrom,
May I ask a very basic question? How did you How to Scan the car with INPA and get the error code? Could you please pose a detail steps?
Because my 2006 325i cranks for not even one second then stall.
The Service Engine Soon light on. But I use INPA can not find any error code.
Thank you very much.
Best regards,
James
I have 07 328i... sometimes my car won’t crank but has all power no codes show no battery light. So I hold the brake down and press the key in for 30 seconds then hit start and my car will crank. It’s like it needs to be reset. If that doesn’t work I will hold the key in and press the start button and hold them for 30 seconds. It will crank. Good luck
The starter on E90's are a known weak point.
ASE and BMW Master Certified Technician
Bookmarks