So I’ve taken my whole door apart trying to get this window adjusted. I’m following the steps exactly as BMW has them laid out. I’m to the part now where I’m supposed to plug the door module back in them lower the window all the way and raise it all the way back up. It says hold the up switch for about 3 seconds after the window has reached the top and it should reinitialize but it won’t.

I’ve tried 5 different times, unplugging and plugging the door module back in but no matter what I do it won’t come back so now my window won’t roll down the couple mm when the handle is actuated. What could cause that because it was all working fine before I started this.