BCM reprogram for LED trailer

[Joker 1]

LED lit trailers do not take enough current so low resistances are needed to partially short out the lights. Unfortunately they give off a lot of heat. Can the BCM be re-programmed so the car is more sensitive to the lower currents when say, higher value 120 ohm shorting resistors are fitted across the LED's?

[DennisCooper]

Hi,

This section is for car audio, so I'd suggest contacting a local reputable auto electrician and looking at the support from the manufacturer of the trailer to see if you can get spec's/advice from them.

Cheers, Dennis!