Results 1 to 4 of 4

Thread: WTB: Roll bar for 97 Z3 Roadster

  1. #1
    Join Date
    Oct 2018
    Location
    Charlestown, RI
    Posts
    3
    My Cars
    17 Tacoma, 97 Z3

    WTB: Roll bar for 97 Z3 Roadster

    Looking for a used aftermarket roll bar for my 97 Z3. I would prefer one with a harness bar. My local auto x group requires a roll bar that's above helmet height for convertibles. I figured I would check and see If there were any floating around before I purchased a new one from Hard Dog.

    Thanks!

    Hayden

  2. #2
    Join Date
    Jul 2013
    Location
    Washington, DC
    Posts
    30
    My Cars
    1997 BMW Z3 2.8 Roadster
    I could never find one used. I ended up buying one from Hard Dog.

    If you end up ordering one, tell them to not put their stickers on it. They're ugly and difficult to remove.

  3. #3
    Join Date
    Oct 2018
    Location
    Charlestown, RI
    Posts
    3
    My Cars
    17 Tacoma, 97 Z3
    Thanks for the heads up on the stickers. I'm going to hold out a bit longer (No autox till spring) and then I will likely order from Hard Dog.

  4. #4
    Join Date
    Jul 2013
    Location
    Washington, DC
    Posts
    30
    My Cars
    1997 BMW Z3 2.8 Roadster
    Opt for the "main hoop diagonal brace" for rigidity.

    BTW, I also found a strut brace for cheap that worked on my '97 2.8L

    The specification didn't include our vehicle. MUST BE M52 2.8L! The strut brace doesn't work for the 4cyl.

    https://www.amazon.com/gp/product/B0070I87JG Current price is $105. TMS costs 2x and, at the time, the only other one I could find was a $$$ Dinan.

Similar Threads

  1. Z3 E36/7 WTB: HMS Roll bar setup for Z3 Roadster
    By Joemamaman in forum Z3,Z4,Z8 Classifieds
    Replies: 6
    Last Post: 12-31-2011, 11:48 AM
  2. Z3 E36/7 WTB: HMS Roll Bar Setup for Z3 Roadster
    By Joemamaman in forum Race Cars & Track Parts
    Replies: 0
    Last Post: 10-31-2011, 09:02 PM
  3. Z3 E36/7 wtb: small bits for a Z3 roadster (little screw covers, a clip and a mat ring)
    By DrSasha in forum Z3,Z4,Z8 Classifieds
    Replies: 10
    Last Post: 08-21-2011, 01:51 PM
  4. WTB: Roll bar/seat belt tower trim covers Z3
    By Max Your Macs in forum BMW Parts Wanted
    Replies: 0
    Last Post: 06-15-2010, 07:43 PM
  5. Z3 E36/7 WTB : Antenna Base for 97 Z3 1.9
    By lestat15 in forum Z3,Z4,Z8 Classifieds
    Replies: 0
    Last Post: 05-11-2009, 08:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •