**Interested in E46 M3 GTR-S Vented Front Fenders for your Racecar? LOOK HERE!**

[widebodyye30]

Hello Bimmerforums Enthusiasts,

This thread was made simply to generate a list of members who are interested in purchasing a pair of FRP Vented front fenders for their 2 Door E46 M3.

As most of you all know we already offer fenders for the E30 and E36 body.

Next step is to offer the Vented front fenders for the E46 M3. Design will be very similar to the E36 vented fenders that we offer but for E46.

They will be made of pure CFRP Gel Coated white. Will need to be prepped primed and painted to match your car. Made IN USA By DTM

Attached are a few pictures of the vented fenders we offer for the E36 and a few pictures for reference of E46 fenders to show what they will look like.

Please not that the fenders are OEM M3 Width fenders with vents added to the top and rear wheel well opening for added Aero.

Price will be $745.00+S&H a pair of FRP Fenders! (production is starting soon and will post updates)

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

E46 vented Fender style for reference ( will be very similar to this design):




E36 Fenders we manufacture:

[ninekrpm]

Interested...

Weight compared to oem?

[widebodyye30]

Interested...

Weight compared to oem?

OEM is fairly light... Will need to weigh them once production is finished

[70chevelless]

I'd be interested in a pair

[jcorbs]

Yes please

[widebodyye30]

INTERESTED MEMBERS

1. ninekrpm
2. 70chevelless
3. jcorbs
4.
5.
6.
7.
8.
9.
10.

[ninekrpm]

OEM is fairly light... Will need to weigh them once production is finished

I am in as long as the weight is equal or less weight than OEM...

[widebodyye30]

I am in as long as the weight is equal or less weight than OEM...

BTW We are also thinking of producing a front bumper OEm width but with built in undertray/ diffuser and brake cooling inlets. What do you guys think about this?

Should look similar to Flossmann style front but made to fit OEM body width.

Attached is picture to illustrate style of bumper. Will have some sort of built in side cannards without looking out of place.

[jakermac]

Penskeparts.com has them at 6.25 lbs.

[widebodyye30]

We have a full GTR Widebody E46 kit in stock so we weighed 1 front fender and it came out to 4lbs. They are hand laid parts so they could slightly be different each production run 0.5 lbs. Will have more info on weight once production is made.

Thanks,

[peropett]

I'd be interested in a pair

[widebodyye30]

I'd be interested in a pair

INTERESTED MEMBERS

1. ninekrpm
2. 70chevelless
3. jcorbs
4. peropett
5.
6.
7.
8.
9.
10.

[widebodyye30]

Should start to have some progress by mid next week on this.

[TopGear8]

These do look pretty sick!

[widebodyye30]

Fenders are being designed as we speak will post up some updates soon!

Front bumper is also being made OEM width with under tray diffuser and 3" air inlet for brake duct.

[ninekrpm]

Looking forward to it

[widebodyye30]

Should also have CFRP roof available as well. E46 race Aero. demand is a bit high nowadays and we are developing a bunch of new parts with aero. functionality and cost in mind

[Aaron318is]

You shouldn't really use photos of original Flossmann parts..

[widebodyye30]

You shouldn't really use photos of original Flossmann parts..

Just showing how the parts will look so potential interested parties know what kind of style fender we are referring to... Thus also posting pictures of our production e36 parts. Please read carefully:

E46 vented Fender style for reference ( will be very similar to this design):

We will have many pictures of our parts once prototype is designed and many installed on cars as well

Thanks,

[widebodyye30]

So much production with our parts as well as private label stuff has pushed the project back a bit. Should have pictures of the prototype this week finally!

[Project SSAP1]

Waiting to see the finished product...

[widebodyye30]

Product mold is now being made place your orders online and use promo code to receive special price of $745.00+S&H!!!

PROMO CODE: E46VNTD

ORDER HERE: http://dtmfiberwerkz.com/access/styl...ers-p-727.html

Here are the pictures

[bennyfizzle]

so the fender fins are closed?

[widebodyye30]

so the fender fins are closed?

They will be notched out for production.

[bennyfizzle]

gotcha, looks great