FS S52 w/zf 5spd $3,000obo

[smr87]

The Good: I have a ~110kmi S52 w/ ZF 5spd out of my '99 M3 for sale. The engine has a brand new OEM water pump, new drive belts, an 80°C thermostat, new aluminum thermostat housing, drive belt tensioners for the AC and main drive, and idler pulleys. The motor is running Turner Motorsports stage 2 software with 24lb injectors, ASC delete, Porsche 3.5" HFM w/Turner Plug and Play harness, and a Dinan CAI for approximately 5kmi. I also installed new coil packs and spark plugs when I did the performance upgrades. Oil and filter were changed annually or 3kmi which ever came first with Rotella T6 and MANN or WIX filters during my ownership. The clutch is strong, and the trans shifts nicely. The fluid was changed with Redline ATF less than 2kmi ago. The engine makes great power with the mods and runs excellent. I did all the maintenance planning on keeping this set up but fell into a deal I couldn't refuse on a LS swap.

The Not So Good: It has a new OEM valve cover gasket, but the valve cover itself probably needs to be replaced, one of the spark plug tubes chipped when I removed the original gasket, which was hardened into the groove. I was going to see if it leaked before replacing it, but I didn't drive the car again after installing it before pulling the engine out.

I'd like to sell this as a complete package with the above listed mods plus the engine wiring harness, tuned DME, an UUC Evo 3 w/DSSR, and a Turner Stainless Clutch Line. I am asking $3,000obo for the complete package including all the modifications listed. I'd prefer local pick-up in Matthews, NC, but would be willing to ship if the buyer makes the arrangements and covers the costs.

[smr87]

Bump

I'm willing to separate pieces if you are interested in something short of the complete package, PM me if your interested. I also have the stock complete M3 driveshaft available as well.

[lbennyboobool]

Bump

I'm willing to separate pieces if you are interested in something short of the complete package, PM me if your interested. I also have the stock complete M3 driveshaft available as well.

how much for the driveshaft?

[smr87]

Hey lbennyboobool, I just sent you a PM.

[smr87]

Bump to first page, make me an offer on the whole kit or parts.

[platanos]

How much for the intake?


Sent from my iPhone using Tapatalk Pro

[smr87]

@platanos; PM'd

[GGug12345]

Interested in maf, possibly intake and dme. Call or text 985-722-5456 Gerard