Originally Posted by
Mazimo
Hi guys,
Thanks for letting me in. Im new in this forum and looking for a solution to the problem with my BMW E87 116i N45 Engine
The background is the timing chain is replaced because the old chain had become slack. I replaced the chains, guides etc according to the workshop manual. After the replacement then there is noise from the top / center of the engine accompanied with bad idle and cylinder missfire. I have used bmw tool to lock the engine when replacing the chain, changed the oil and filter. The engine run fine before the chain replacement.
I have diagnosed the ECu and get fault code P0015
So far I have replaced follwing part with no result
Vanos Unites (both)
Vanos Solinoids (Both)
Any suggestions are welcome, would appreciate all help I can get.
Thanks again
Bookmarks