I've done replace clutch plate, seal (all repair kit) and solenoid but then 4F88 ( EGS (Electronic Transmission Control): ratio monitoring, gearshift 2-3 show up. In this situation, the transmission got lack of power which sometime like in N position and suddenly accelerate in bad condition. Anyone can help me please :3
Thank you my friends
I would check your adaptation numbers any higher than 300 is not great, the number represents the pressure at the clutches
Please complete your profile that people know about what model you are talking
Moved to E60 forum, as I remember that you posted in another thread that you have an E60My Cars: BMW
As mentioned in the other thread already: You really need to identify the car, when asking for help on this forum. Even "E60" really doesn't do it. Tell us the manufacture date (month and year), and the model (i.e. 525, 530, 545). Certainly, after changing the Mechatronics seal, replacing clutches, and changing the fluid and filter/pan, you need to clear adaptations and do an adaptation run as specified in the above service bulletin. I'd also ask whether the transmission was filled correctly, with engine running, with the correct fluid, and at the correct temperature.
Last edited by shogun; 10-23-2018 at 10:54 AM.
Shogun tricks and tips for the E32 series are HERE!
Bookmarks