oem import direct
For those running e85, which filter are you using?
Last edited by m3boost; 10-22-2018 at 10:52 PM.
96 M3, GT4094R, Arrow Rods, CP Pistons, Elring HG, cutring 87mm, 10 mm ARP studs,MS3pro, EMC Intercooler, n54 6 speed with Motiv twin disk, ZT-2 wideband, Zionsville Radiator, X-brace, H&R springs with bilstien shocks, QTP electronic cutout, Line Locks, stock exhaust 455rwtq, 453rwhp at 14 psi 91 octane.......684rwtq, 681rwhp at 24 psi running flex fuel E60 at time of dyno tune.
u owe my mule an apology
Available at every napa
https://pitstopusa.com/i-5083002-wix...-wix24744.html
86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
best time 9.06 @ 151.8 mph, best 60 foot 1.30
Member
Been running stock filters for 4 years now without any noticeable issues. Car sits for about 3 months each winter too with e85 in it.
Member
The guys from Injector Dynamics told me that you should stay away from paper elements for ethanol. They will work for some time and you may not notice a difference as long as your fuel pump has overhead to compensate as they degrade but you'd be better off switching to microglass filters meant for ethanol. Before I switched to the ID750 I got a microglass element for my Aeromotive filter
L0Tbuu6.jpg
Member
Fuelab 828 Series 5" Inline Filter, with the 6-micron micro-fiberglass element. Fits in the stock fuel filter clamp perfectly.
96 M3 | Forged LSx | Twin S366 | Injector Dynamics | E85 | AEM Infinity
90 Schwarz 325i
IG : sdobart
Stay out of trouble.
is there actually any real horror storys about using the paper filter?
i feel allot of people do this including myself with no noticeable effects.
like a look into a 10,000 mile paper filter ect.
Last edited by Robocop; 10-26-2018 at 06:35 PM.
u owe my mule an apology
i was using some clear universal 3/8” filters for awhile pre pump and after a couple months they would start to turn to mush and the pleets would stick together and restrict the flow to nothing.Originally Posted by Robocop
86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
best time 9.06 @ 151.8 mph, best 60 foot 1.30
Posting Permissions
Reply With Quote
Bookmarks