07/98 750iL
Issue: Interior dummy gauge is not reading. Cluster test makes it "move". The heads up will display the temperature with cluster cracked.
Yesterday, I replaced the temp sensor in the top of the intake. No change. I'd thought there was only that sensor
and one on the thermostat. There is a 3rd on the radiator itself.
My question is, which one feeds the dummy gauge?
It's # 6 in the diagram.
Double temperature switch 91/104CEL
https://www.realoem.com/bmw/enUS/sho...diagId=17_0105
Last edited by 740ilDuke; 10-14-2018 at 05:09 PM. Reason: .
2001 | DINAN 7 Sport | S62 Swapped 6-Speed
DINAN Springs & Exhaust | 750 Brakes | M-Pars | Monsoons | NBT Nav/Radio
Dual Pane Glass | Black & Sand Int.
2001 | 750iL | AlpineWeiss III
@scotthduke on Instagram
Cluster test makes it move all the way to the end? Have a spare cluster you can program and test? I had one that someone failed a pixel repair that would even go up a qtr of the way and cluster would almost make it to the end but not fully. Had to have the motor replaced in it and its back to normal now...
Sent from my SM-N960U using Tapatalk
Last edited by purplecty; 10-14-2018 at 05:26 PM.
Yeah, cluster is good.
IMG_7371.jpg
2001 | DINAN 7 Sport | S62 Swapped 6-Speed
DINAN Springs & Exhaust | 750 Brakes | M-Pars | Monsoons | NBT Nav/Radio
Dual Pane Glass | Black & Sand Int.
2001 | 750iL | AlpineWeiss III
@scotthduke on Instagram
Timm mentioned in a post of yours I just found that it came from the T-stat itself on the V8. Id assume the V12 would be the same, but trying to verify before getting into replacing that. I have a spare from a previous 750 I had, luckily should it be that one.
https://www.bimmerforums.com/forum/s...ing-on-cluster
2001 | DINAN 7 Sport | S62 Swapped 6-Speed
DINAN Springs & Exhaust | 750 Brakes | M-Pars | Monsoons | NBT Nav/Radio
Dual Pane Glass | Black & Sand Int.
2001 | 750iL | AlpineWeiss III
@scotthduke on Instagram
Bookmarks