Results 1 to 6 of 6

Thread: LED Tail Lights problem Mod with NCS Expert...

  1. #1
    Join Date
    Jul 2010
    Location
    Porto
    Posts
    10
    My Cars
    BMW e36 318i Cabrio

    Unhappy LED Tail Lights problem Mod with NCS Expert...

    A few days ago I bought and installed these lights on my e46.
    The problem is that lights #1 and #2 are always ON.
    I would like to have the lights #1 as running lights and #2 just to be fog lights.
    I tried several mods on NCS but with no luck. Any help would be much appreciated.

    To turn ON the lights #1 I have to choose "Use Fog Lights as Running Lights". Strange!! It seems my car's assuming my running lights are the #2.

    I also saw some cars with only the outer leds of lights #1 On. But can't seem to be able to code that to.

    I have a BMW E46 320D SEDAN from 2003 (post facelift - European model)

    99_01_bmw_3_series_e36_sedan_performance_led_tail_lights_red_smoked_18.jpg

  2. #2
    Join Date
    Jul 2010
    Location
    Porto
    Posts
    10
    My Cars
    BMW e36 318i Cabrio
    Someone? Please?

    I've placed the original non LEDs tail lights and I get the same behavior.
    For some strange reason my car is assuming the fog lights as running lights.

    I bought an LCM switch from eBay with Auto Lights and SW: 3.6 (Mine didn't had Auto Lights).
    I think I did this correctly because I have no tamper dot. (I did the procedure via PA Soft)

    I'm trying to fix this issue for 3 weeks now...

  3. #3
    Join Date
    Jul 2010
    Location
    Porto
    Posts
    10
    My Cars
    BMW e36 318i Cabrio
    Someone willing to help? This is driving me nuts!!!!

  4. #4
    Join Date
    Jul 2010
    Location
    Porto
    Posts
    10
    My Cars
    BMW e36 318i Cabrio
    Could someone please send me their ALSZ file with rear fog lights off? I would like to compare it with mine.
    I think I'm missing something related with PWM...

  5. #5
    Join Date
    Jul 2010
    Location
    Porto
    Posts
    10
    My Cars
    BMW e36 318i Cabrio
    One strange (or not) thing is that if I disable "Fog lights as running lights" only the trunk lights power on. Is this normal?
    I just would like to use the inner (trunk) trunk lights as fog light and NOT as running lights.

    This is driving me crazy!!!!! Please help!!!
    Last edited by rucanunes; 10-28-2018 at 10:28 AM.

  6. #6
    Join Date
    Jul 2010
    Location
    Porto
    Posts
    10
    My Cars
    BMW e36 318i Cabrio
    up

Similar Threads

  1. NCS Expert coding E87 retrofit LED tail lights?
    By ogee in forum Diagnostic Software
    Replies: 28
    Last Post: 10-22-2011, 12:34 PM
  2. Eagle Eye LED Tail Light Problem
    By Experimental M3 in forum Lighting sponsored by BAVToys
    Replies: 0
    Last Post: 03-15-2011, 03:23 PM
  3. Problem with Depo E36 LED tail lights
    By The Phatman in forum Lighting sponsored by BAVToys
    Replies: 4
    Last Post: 02-15-2010, 05:10 AM
  4. Problem with E36 Depo LED tail lights
    By The Phatman in forum Lighting DIY and FAQ
    Replies: 0
    Last Post: 02-11-2010, 09:43 AM
  5. eagle eye tail light problem (not burned out LED's)
    By alex62693 in forum 1999 - 2006 (E46)
    Replies: 5
    Last Post: 01-04-2010, 11:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •