A few days ago I bought and installed these lights on my e46.
The problem is that lights #1 and #2 are always ON.
I would like to have the lights #1 as running lights and #2 just to be fog lights.
I tried several mods on NCS but with no luck. Any help would be much appreciated.
To turn ON the lights #1 I have to choose "Use Fog Lights as Running Lights". Strange!! It seems my car's assuming my running lights are the #2.
I also saw some cars with only the outer leds of lights #1 On. But can't seem to be able to code that to.
I have a BMW E46 320D SEDAN from 2003 (post facelift - European model)
99_01_bmw_3_series_e36_sedan_performance_led_tail_lights_red_smoked_18.jpg
Someone? Please?
I've placed the original non LEDs tail lights and I get the same behavior.
For some strange reason my car is assuming the fog lights as running lights.
I bought an LCM switch from eBay with Auto Lights and SW: 3.6 (Mine didn't had Auto Lights).
I think I did this correctly because I have no tamper dot. (I did the procedure via PA Soft)
I'm trying to fix this issue for 3 weeks now...
Someone willing to help? This is driving me nuts!!!!
Could someone please send me their ALSZ file with rear fog lights off? I would like to compare it with mine.
I think I'm missing something related with PWM...
One strange (or not) thing is that if I disable "Fog lights as running lights" only the trunk lights power on. Is this normal?
I just would like to use the inner (trunk) trunk lights as fog light and NOT as running lights.
This is driving me crazy!!!!! Please help!!!
Last edited by rucanunes; 10-28-2018 at 10:28 AM.
up
Bookmarks