I bought a 07 525IX when I got it the Info Screen in the center of the dash was black.
I checked all fuses and grounds to the head unit and all was well.
I purchased a used head unit with exactly the same numbers on it .
I installed it and screen lit up and is responsive . But a message comes up saying " HEAD UNIT NOT CODED CORRECTLY". Also no sound is obtainable
I got a proper cable and software installed on my laptop ( WINKFP) . I ran INPA and WINKFP and 2 modules 62 MOSTGW and 63 MMI/CCC still show
the VIN from the donor headunit. Is this the problem that needs corrected?
I tried to change the VIN on these two modules but It does not seem to respond.
A BMW mechanic told me the modules can only be reprogrammed with ICOM B and the fiber optic adaptor because they are not on the CAN Bus.
IS This correct?
Any help would be greatly appreciated.
ask tim spicer BMW specalist in cambridge. He will know evrything there is to know about this.
Bookmarks