Hi,
Please let me ask everyone. I searched on this Bimmerforum but could not find the right thread.
Now I am checking all of A/C related part and wondering where is the low-pressure port of BMW e24 635 and M6?
Thank you in advance!
Follow the suction lines
https://www.realoem.com/bmw/enUS/sho...diagId=64_0510
Thanks 1986series6!
I think I found the port.
Screen Shot 2018-09-21 at 18.13.32.png
Toki,
If you want to know the thread sizes on the top of Wingcell compressor, for the hoses to attach to.
The larger intake thread size is 3/4" x 14 TPI, its not metric, Edit (low pressure)
The smaller output thread size is 1/2" x 16 TPI, Edit (high pressure)
I have a rebuild service for the Wingcell's
Best,
Last edited by master6; 09-25-2018 at 10:15 AM.
Jay
'88 M6 Cinnabar Red / Nappa Natur Highline Interior (10-87) Santa Ana, California. USA
My NEW Website, Link : https://www.jaysbmwparts.com
Booster repair
https://www.jaysbmwparts.com
A/C Wingcell Compressor leak repair
https://www.jaysbmwparts.com
e31 Door Handle Fix,
https://www.jaysbmwparts.com
If I'm right the low pressure suction line is the larger AC line where the smaller line is the high pressure line. If adding freon be certain to only fill using the suction line. High pressure can burst the freon can causing injury.
Bookmarks