Hi all,
Is there any way I can adjust the front bumper? I think I have a huge gap. It's all original.
Track car would look nicer when this is aligned properly.
See photos.
Photo 1: horrible gap.
Photo 2: looks allright-ish
Photo 3: gap
Photo 4: from the inside out. Gap.
Photo 5: right side inside out gap
Thanks guys, very curious.
Verstuurd vanaf mijn SM-G950F met Tapatalk
I think I managed to fix it the most I could.
I bent the mounting brackets for the bumper on the sides.
Verstuurd vanaf mijn SM-G950F met Tapatalk
Bent? There is a piece on the side with 2 screws where the bumper slides into that can be adjusted.
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
Undo these bolts a little, then the piece can be adjusted upwards.
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
Bookmarks