Hello guys,
I recently used INPA on my E92 325D M SPORT and reset the CAS counter to fix the steering lock error.
It fixed the error but now my car turns over but won't start. The error I get is 4a63 - EWS tampering protection.
I'm assuming it's because the DME/CAS is out of sync now and I know it can be done in INPA, however, I get the error when selecting my engine (M57TU2) in INPA.
(requested control unit not found, control unit found, D62M57A0).
Any help would be great thanks.
Bookmarks