Results 1 to 3 of 3

Thread: Like New E36 Clutch Master FX850 twin disk clutch + sintered iron disk option

  1. #1
    m3mods's Avatar
    m3mods is offline Boost Addict BMW CCA Member
    Join Date
    Sep 2011
    Location
    Seattle, WA
    Posts
    4,203
    My Cars
    AC Schnitzer S3 CLS

    Like New E36 Clutch Master FX850 twin disk clutch + sintered iron disk option

    Selling a basically new Clutch Master fx850 twin disk clutch with aluminum flywheel and their sintered iron disk option that is not listed on their website or offered as an “off the shelf” option.

    The sintered iron disk option was around $200 extra (I’ll try and remember to call them tomorrow during business hours to confirm).

    This setup with sintered iron disks is rated to hold over 1,000wtrq. Their techs were concerned about their street and race options holding anything over 750-800wtrq with any certainty so they recommended sintered iron.

    I installed this setup on a built s52 with the idea of breaking it in n/a before embarking on a twin turbo build but sadly the motor had a nearly dead cylinder due to a slightly bent valve and the whole project has been torn down.

    I drove the car twice, once pulling it out of the shop and another time for about a mile down the street trying to troubleshoot the issue before doing a compression test and confirming my worst fears.

    So here’s your chance at a basically brand new twin disk setup that will literally hold anything you could ever possibly throw at it while still being well mannered enough to drive on the street. (Much more drivable than the cm fx725 I had in a previous build).

    This is designed for an i6 e36 running a zf310 or zf320 5 spd manual trans but will fit many other cars/ motors. You can also have Clutch Master re-spline the disks for a Getrag 420g as well if that’s what you’re running.

    The street and race versions of this retail for $2100 plus another $200ish for the sintered iron disks.

    Asking $1675 plus shipping


















    Last edited by m3mods; 09-16-2018 at 01:52 PM.

  2. #2
    Join Date
    Jun 2005
    Location
    New England
    Posts
    25,402
    My Cars
    F90 M5; E36 M3 Turbo
    What does it weigh with flywheel?

  3. #3
    m3mods's Avatar
    m3mods is offline Boost Addict BMW CCA Member
    Join Date
    Sep 2011
    Location
    Seattle, WA
    Posts
    4,203
    My Cars
    AC Schnitzer S3 CLS
    Quote Originally Posted by pbonsalb View Post
    What does it weigh with flywheel?
    22.5lbs

Similar Threads

  1. E36 Clutch Master FX725 Twin disk
    By Dricebrug in forum Drivetrain & Transmission Parts
    Replies: 6
    Last Post: 09-15-2014, 08:44 PM
  2. E36 Up for sale: Clutch masters fx850
    By xinline6x in forum Drivetrain & Transmission Parts
    Replies: 2
    Last Post: 02-12-2013, 01:54 PM
  3. E36 NEW e36 A/C Compressor (without pulley/clutch)
    By creeves328 in forum Engines, Performance Parts & Software
    Replies: 0
    Last Post: 05-01-2011, 10:33 PM
  4. Brand New E36 Brake Master Cylinder OEM ATE
    By Zubehor in forum Brake Kits, Rotors & Pads
    Replies: 3
    Last Post: 05-07-2008, 10:22 PM
  5. NEW: E36 M3 Master Cylinder
    By magnetic1 in forum Brake Kits, Rotors & Pads
    Replies: 0
    Last Post: 11-24-2007, 07:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •