Ever since I bought the car it had this bad clunking noise coming from the front driver side. I just thought with the turner sway bar and bilstien coilovers it might be normal.
But I found this. Front end link. Hoping this is the culprit
the pass side has a newer non adjustable. This one was adjustable. I’m just going to buy smith non adjustable see if that is the fix.
12A7A4FE-59BF-4721-AE0F-54FC96112036.jpg
Last edited by stubble88; 09-08-2018 at 07:25 PM.
Depending on how you want your suspension set up, you might want adjustable links. You want a neutral setting under load. I don't think you can corner balance properly without adjustable links.
Agreed, if you have aftermarket suspension and sway bars and a non-stock ride height a strongly suggest getting adjustable links. I use the Turner ones and they're fine.
1999 M3/2/5 - Titanium Silver - Track/Weekend Toy
I have GC coilovers, UUC sway bars, and just removed my adjustable end links and installed the Meyle HD ones....
1997 Arctic Silver/Black M3
CES Stage IV (651rwhp/615rwtq @ 24 psi)
1999 Techno Violet/Dove M3
Auto/Convertible and staying stock!
i bought a solid Lemforder $30
did the trick
clunking gone. I don't track the car or even adjust any of the adjustable stuff. So I didnt bother with the $160 adjustable end links.
thanks
Bookmarks