Any help would be appreciated .... i know its a long shot but its worth a try,
WOW.. that e23! My guess would be that sways from a 745 would be more readily available. A post would on mye28.com wouldn't hurt. Few e23 guys on that site.
I have a few sets I am going to copy to make available to people again. I cannot make them this year, sorry.
FWIW, I spent nearly 15 years scouring around for the three sets I have on hand.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Mine are 29/19 and 29/22s. One set are Dinans, other are from a defunct Performance International Motorsports sold as 'Performance Series' from memory.
I have a stock 745i rear I may sell, working on coping those brackets.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Depends how much cash you are offering, but probably not. That is like my Sanden bracket I have left to recreate.
What is your HVAC not doing? Anything? At this point it probably needs everything, it is 30+ years old. Focus on the vent/heat/air flow portion first. Unless you are handy with A/C, then pull a vac on the thing and shoot three, 10oz cans of air duster into it. That will mimic R12 performance.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
LOL..ok no dice on the Dinan sway bars.
My HVAC system actually works on occasion when I hit a hard bump and then I can hear the blower motor start slowly winding up to speed and working. The system has been converted over to new AC refrigerant. But it works properly on occasion.
Bookmarks