Has anyone had an issue after maybe an update with any module you now get "H2 Reserve Please Refuel". I know it's not the fuel sensor because I changed it and I was able to see the sensor working properly under the hidden menu when pressing the mileage reset button. Also, I ran ISTA+ Diagnostic for Kombi ECU, the Fuels Sensors are working properly. To me it seems that maybe the fuel gauge needs to be enabled, some sort of software issue.. I was using NCSEXPERT/NCSDUMMY tried turning off the warning for 'H2 RESERVE' but it continues to come back on. Anyone has any solutions would ISTA/P fix this issue if so what are the steps(I have ISTA+ and ISTA/P working perfectly) ?
I think you have the honor of being the first Hydrogen related question. (At least as far as I've read.) That being said, are you overall pleased with the car? I recently leased a Marai, and think its great.
Basically I have fixed this issue on the E65 , I just changed Daten Versions. I updated the ECU and now the regular Gas tank shows.
Do you have the Daten versions that you used? I’m having the same problem right now, when I updated kombi with ncs and when it finished it start saying hydrogen refuel
had that same problem before when i was updating my kombi using ncs, turns out i used the wrong zb number for my kombi, flashed it to the correct zb number and everything went back to normal
Sent from my LYA-L29 using Tapatalk
The ZB number I see is 4115553, does anyone know what ZB number I should use for a 06 bmw 750li?
I used zb number 9140818
Sent from my LYA-L29 using Tapatalk
Bookmarks